여러분의 지식탐구 동행자 로봇사이언스몰입니다.
Login Join Cart Order MyPage CS Center
School PayAfter 전문가에게 상품추천받기 결제오류 문의전화번호안내 회원전용 개인결제창 비회원 개인결제창
1vs1Question UserManual AttachedIcon Online Class Biz Partner Join Partner
A/S접수하기 기술문의 견적서 요청하기 할인&이벤트상품 방과후수업 코딩강사매칭

QUICK MENU

최근본상품 0

    prev
    /
    next

    추천상품 0

      prev
      /
      next

      장바구니 0

        prev
        /
        next

        위시리스트 0

          prev
          /
          next

          TOP BOTTOM
          네이버 톡톡  톡톡
           
          • 모터, 서보모터, 스텝모터 드라이버 및 컨트롤러
          • [로봇사이언스몰][Pololu][폴로루] Pololu Simple High-Power Motor Controller 18v25 #1381
            상품번호 : 12083

            아이콘 설명보기
          • 10%
          • 상품코드 : RS-012083
            * 해외상품 국내보유 재고 : 0 개
            * 재고가 0 또는 수량 부족 시 해외상품배송안내 클릭
            * 국내상품/해외상품 식별방법 보러가기
            판매가
            257,400₩

            할인내역

            구분 할인
            기본할인 23,400₩
            닫기
            234,000(부가세포함)
            무이자할부
            5만원 이상 무이자 자세히보기

            무이자할부

            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            닫기
            배송
            • 3,500₩ (100,000₩ 이상 무료)
              추가배송비 : 1,000₩~10,000₩ (지역별)
              지역별차등금액적용
              달력
            적립혜택
            2,340₩
            상품정보

            상품정보제공고시

            품명 및 모델명 상세설명참조
            법에 의한 인증,허가 등을 받았음을 확인할수 있는 경우 그에 대한 사항 상세설명참조
            제조국 또는 원산지 상세설명참조
            제조자,수입품의 경우 수입자를 함께 표기 상세설명참조
            AS책임자와 전화번호 또는 소비자상담 관련 전화번호 상세설명참조
            상품위치
            닫기
            고객평가
            0건  ★★★★★ (0/5)
            판매자
            본사
          • 수량
            • 총 상품금액
            • 234,000
          • 위시리스트

          [로봇사이언스몰][Pololu][폴로루] Pololu Simple High-Power Motor Controller 18v25 #1381



          Brushed DC Motor Controllers 비교 테이블 다운로드


          The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 25 A without a heat sink. It ships with the power capacitor and connectors included but not soldered in, allowing for custom installations.

          Overview


          Simple Motor Controllers.

          The Pololu Simple Motor Controllers are versatile, general-purpose motor controllers for brushed, DC motors. A wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control applications. With a variety of supported interfaces—­USB for direct connection to a computer, TTL serial for use with embedded systems, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), and analog voltages for use with a potentiometer or analog joystick—­and a wide array of configurable settings, these motor controllers make it easy to add basic control of brushed DC motors to a variety of projects. Although this motor controller has many more features than competing products, a free configuration utility (for Windows and Linux) simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.

          For 24 V applications, we recommend the 24v12 or 24v23 versions. We strongly recommend against using the 18v7, 18v15, or 18v25 with 24 V batteries, which can significantly exceed 24 V when fully charged and are dangerously close to the maximum voltage limits of these lower-voltage controllers.

          Key Features


          Simple High-Power Motor Controller 18v25 or 24v23 simplified connection diagram.

          • Simple bidirectional control of one DC brush motor.
          • 5.5 V to 30 V (18v7, 18v15, and 18v25) or 40 V (24v12 and 24v23) operating supply range.
          • 7 A to 25 A maximum continuous current output without a heat sink, depending on controller model
          • Four communication or control options:
            1. USB interface for direct connection to a PC.
            2. Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers.
            3. Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller.
            4. 0–3.3 V analog voltage interface for direct connection to potentiometers and analog joysticks.
          • Simple configuration and calibration over USB with free configuration program for Windows.


          Note: A USB A to mini-B cable (not included) is required to connect this controller to a computer.

          Additional Features

          • Comprehensive user’s guide with plenty of connection diagrams and sample code.
          • Adjustable maximum acceleration and deceleration to limit electrical and mechanical stress on the system.
          • Adjustable starting speed, maximum speed, and amount of braking when speed is zero.
          • Optional safety controls to avoid unexpectedly powering the motor.
          • Input calibration (learning) and adjustable scaling degree for analog and RC signals.
          • Under-voltage shutoff with hysteresis for use with batteries vulnerable to over-discharging (e.g. LiPo cells).
          • Adjustable over-temperature threshold and response.
          • Adjustable PWM frequency from 1 kHz to 22 kHz (maximum frequency is ultrasonic, eliminating switching-induced audible motor shaft vibration).
          • Error LED linked to a digital ERR output, and connecting the error outputs of multiple controllers together optionally causes all connected controllers to shut down when any one of them experiences an error.
          • Field-upgradeable firmware.
          • USB/Serial features:
            • Controllable from a computer with native USB, via serial commands sent to the device’s virtual serial (COM) port, or via TTL serial through the device’s RX/TX pins.
            • Example code in C#, Visual Basic .NET, and Visual C++ is available in the Pololu USB Software Development Kit
            • Optional CRC error detection to eliminate communication errors caused by noise or software faults.
            • Optional command timeout (shut off motors if communication ceases).
            • Supports automatic baud rate detection from 1200 bps to 500 kbps, or can be configured to run at a fixed baud rate.
            • Supports standard compact and Pololu protocols as well as the Scott Edwards Mini SSC protocol and an ASCII protocol for simple serial control from a terminal program.
            • Optional serial response delay for communicating with half-duplex controllers such as the Basic Stamp.
            • Controllers can be easily chained together and to other Pololu serial motor and servo controllers to control hundreds of motors using a single serial line.
          • RC features:
          Two Pololu Simple Motor Controllers enable mixed RC-control of Dagu Wild Thumper 4WD all-terrain chassis.
            • 1/4 µs pulse measurement resolution.
            • Works with RC pulse frequencies from 10 to 333 Hz.
            • Configurable parameters for determining what constitutes an acceptable RC signal.
            • Two RC channels allow for single-stick (mixed) motor control, making it easy to use two simple motor controllers in tandem on an RC-controlled differential-drive robot (you might find our RC servo Y splitter cables useful for connecting two SMCs to a single RC receiver).
            • RC channels can be used in any mode as limit or kill switches (e.g. use an RC receiver to trigger a kill switch on your autonomous robot).
            • Battery elimination circuit (BEC) jumper can power the RC receiver with 5 V or 3.3 V.
          • Analog features:
            • 0.8 mV (12-bit) measurement resolution.
            • Works with 0 to 3.3 V inputs.
            • Optional potentiometer/joystick disconnect detection.
            • Two analog channels allow for single-stick (mixed) motor control, making it easy to use two simple motor controllers in tandem on a joystick-controlled differential-drive robot.
            • Analog channels can be used in any mode as limit or kill switches.

          This video demonstrates the versatility of the Simple Motor Controller by showing how it can be controlled directly from the analog output of a Sharp analog distance sensor—there is no intermediate control board and no programming involved. For more information on this example, including the SMC settings file and a list of parts used, see our blog post about the demo.


          Pololu Simple Motor Controllers  비교 테이블 다운로드

          Included Hardware


          Simple High-Power Motor Controller 18v15 or 24v12, fully assembled.
          Simple High-Power Motor Controller 18v15 or 24v12, partial kit with included hardware.

          Most Simple Motor Controllers are available “fully assembled”, with the power capacitor and connectors pre-installed, or with these components included but not soldered in. For example, a fully assembled 18v15 ships as shown in the left picture above, and an 18v15 with included hardware ships as shown in the right picture above (the included hardware consists of a power capacitor, a 40×1 straight 0.1" male header strip, a 5mm-pitch 4-pin terminal block, and a blue shorting block).

          The connector-free version allows flexibility in choice of connectors and placement of the power capacitor (e.g. on the other side of the board) to accommodate compact installations or to make room for a heat sink.

          Note: The power capacitor has a significant effect on performance; the included capacitor is the minimum size recommended, and bigger ones can be added if there is space. A bigger capacitor might be required if the power supply is poor or far (more than about a foot) from the controller.

          The included terminal blocks are only rated for 16 A, so we recommend soldering thick wires directly to the connector-free version of the board and using higher-current connectors for applications that will exceed the terminal blocks’ ratings.


          Simple Motor Controller 18v7 bottom view with dimensions.
          Simple High-Power Motor Controller 18v15 or 24v12 bottom view with dimensions.



          Simple High-Power Motor Controller 18v25 or 24v23 bottom view with dimensions.

          Warning: Take proper safety precautions when using high-power electronics. Make sure you know what you are doing when using high voltages or currents! During normal operation, this product can get hot enough to burn you. Take care when handling this product or other components connected to it.

          Dimensions

          Size:2.3" x 1.2" x 0.4"
          Weight:12 g1

          General specifications

          Motor channels:1
          Control interface:USB; non-inverted TTL serial;
          RC servo pulses; analog voltage2
          Minimum operating voltage:5.5 V
          Maximum operating voltage:30 V
          Continuous output current per channel:25 A3
          Maximum PWM frequency:21.77 kHz
          Maximum logic voltage:3.3 V4
          Reverse voltage protection?:N
          Partial kit?:Y

          Notes:

          1
          Without included hardware.
          2
          Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
          3
          Typical results at room temperature without a heat sink.
          4
          All digital inputs are 5V tolerant.


          Documentation and other information

          Pololu Simple Motor Controller User’s Guide (Printable PDF)

          User’s manual for the Pololu Simple Motor Controllers.

          Pololu USB Software Development Kit

          The Pololu USB SDK contains example code for making your own applications that use native USB to control the Jrk Motor Controller, Maestro Servo Controller, Simple Motor Controller, or USB AVR Programmer.

          Application Note: Using AutoHotkey with Pololu USB Products (Printable PDF)

          An application note about using AutoHotkey for Windows to control Pololu USB products.


          File downloads

          Simple Motor Controller Windows Drivers and Software (release 121204) (5MB zip)
          This ZIP archive contains the installation files for the Simple Motor Control Center, the Simple Motor Controller command-line utility (SmcCmd), and the required USB drivers for Microsoft Windows.
          Simple Motor Controller Linux Software (release 101119) (115k gz)
          This tar/gzip archive contains the binary executable files for the Pololu Simple Motor Control Center (SmcCenter) and the Simple Motor Controller command-line utility (SmcCmd) for Linux. Use “tar -xzvf filename.tar.gz” to extract it.
          Firmware version 1.04 for the Simple Motor Controllers (266k fmi)
          Use this file with the Pololu Simple Motor Control Center to upgrade your Simple Motor Controller’s firmware. See the instructions in the “Upgrading Firmware” section of the user’s guide for more information.
          Drill guide for Simple Motor Controller 18v7 (103k dxf)
          This DXF drawing shows the locations of all of the board’s holes.
          Drill guide for Simple High-Power Motor Controller 18v15 or 24v12 (116k dxf)
          This DXF drawing shows the locations of all of the board’s holes.
          Drill guide for Simple High-Power Motor Controller 18v25 or 24v23 (153k dxf)
          This DXF drawing shows the locations of all of the board’s holes.




          1. 소비자상담센터 : 02-2283-1300 

          2. 상품준비 및 배송기간안내
           
              상품 출고(배송) 준비기간 
                  a. 국내상품 : 
                       1) 해당상품 : 아이콘이 부착된 상품 
                       2) 입금 확인 후 최소 0일~최대 3일(단, 품절상품 제외) 

                  b. 해외상품 :

                       1) 해당상품: 아이콘이 부착된 상품 

                       2) 구매금액 700,000원 이상 : 입금확인 후 최소 5일 ~ 최대 2주 

                       3) 구매금액 700,000원 이하 : 입금확인 후 최소 1주 ~ 최대 8주 

                       4) 단, 해외계약업체에 품절되지 않은 상품에 한함 

             ② 구매상품 종류가 많을 경우 예상 준비기간 보다 더 소요 될 수 있습니다. 

             ③ 주문하신 상품은 출고완료 메일 또는 문자 수신 후 익일~최대7일(도서,산간지역) 

                이내에 수령하실 수 있습니다. 

             ④ 제주(\3,500원)/도서지역(\5,000원)은 배송비가 추가됩니다. 

                제주,도서, 산간지역은 타 지역보다 배송기간이 길어질 수 있습니다. 

             ⑤  아이콘이 부착된 상품이라도 국내재고가 있을 수 있습니다. 

             ⑥ 해외 현지 사정으로 인해 공지한 배송기간보다 더 길어 질 수 있습니다. 

             ⑦ 해외상품은 반품/교환/취소가 어려울 수 있으니 신중히 주문하시기 바랍니다.

           

          3. 소비자의 단순변심/착오구매에 의한 청약철회제한안내 


              전자상거래 등에서의 소비자보호에 관한 법률 제17조 제2항 및 동 시행령 

                제21조에 의한 청약철회 제한 사유에 해당하는 경우 및 기타 객관적으로 

                이에 준하는 것으로 인정되는 경우에 한합니다. 

             ② 소비자의 단순변심, 착오구매에 의한 교환/반품 시에 발생하는 배송비는 

                소비자가 부담합니다. 

             ③ 판매자의 실수,제품하자 등의 사유로 인한 배송비는 판매자가 부담합니다.

           

          4. 상품의 교환/반품/보증조건 및 품질보증기준안내

           

              상품이 공급된 날(배송완료일)로부터 7일 이내에 교환/반품을 신청 할 수 있습니다. 

                그러나 아래의 사유에 해당 하는 경우에는 교환/반품 신청이 받아들여지지 않을 수도 있습니다. 

                  a. 소비자의 책임으로 인해 상품이 훼손/멸실 된 경우(확인을 위한 포장훼손제외) 

                  b. 소비자의 사용에 의해 상품의 가치가 현저하게 감소한 경우 

                  c. 시간의 경과로 인해 상품의 재판매가 불가하게 된 경우 

                  d. 판매방식의 특성으로 판매자에게 회복할 수 없는 피해가 발생한 경우 (주문제작 상품, 청약철회상품 등) 

             ② 교환/반품/보증조건 및 품질보증기준은 『소비자기본법』에 따른 소비자분쟁해결기준에 따라 피해를 보상합니다.

           

          5. 소비자피해보상 처리, 재화 등에 대한 불만 및 분쟁처리 안내

           

             ① 본 상품은 소비자 분쟁해결기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.


          관련상품

            • 아두이노 우노 R3 초보자 키트 스텝 1
            • 아두이노 실습을 위한 필수 부품이 포함된 키트, 특히 아두이노 코딩 배우기 교재를 따로 구매 하실 수 있는 제품입니다.
            • 판매가 ₩ 24,200
            • 페이지뷰 8,330
              • 조건부 무료배송
            • 라즈베리파이 고급 키트
            • 다양한 입출력-센서-디스플레이-통신-인터페이스 모듈 및 기타 액세서리로 구성된 울티메이트 라즈베리파이 키트
            • 판매가 ₩ 99,000
            • 페이지뷰 1,467
              • 조건부 무료배송
            • 아두이노 메가 2560 고급 키트
            • 아두이노 우노 R3보다 많은 입출력포트 확보가 가능하여 다양한 확장모듈 연동이 가능한 키트로 번거로운 케이블 연결을 최소화한 전문엔지니어를 위한 메가2560기반 아두이노 고급 키트
            • 판매가 ₩ 132,000
            • 페이지뷰 9,999+
              • 조건부 무료배송

          판매자 관련상품

          판매자 정보

          판매자 정보
          판매자 본사  셀러등급
          상호명 (주)위키모바일(로봇사이언스몰) 대표자 김경식
          사업자등록번호 215-87-14086 통신판매신고번호 제2008-서울송파-0867호
          연락처 02-2283-1300 사업장 소재지 서울특별시 송파구 문정동 643-1 엠스테이트 B동704호
          1. 주문하신 물품의 총 결제금액이 15만원 이상 (환율의 변동에 따라 다를 수 있음) 이면 과부가세가 발생합니다. 관부가세는 고객님께서 부담하시는 금액으로 문자를 통해 입금내역이 발송되며 해당 관세사로 입금하시면 통관처리됩니다.

          2. 해외구매 특성상 주문에서 배송까지는 평균 10~15일이 소요됩니다. 간혹 현지 제품 수급에 따라 부득이하게 시일이 더 소요 될 수 있으니 구매시 좀 더 여유있게 주문하시길 권합니다.

          3. 해외 내수품인 관계로 A/S에 대해서는 별도의 책임을 지지 않습니다.

          4. 해외배송 특성상 주문접수후 배송상태가 배송준비중으로 넘어간 경우 해외에서 국내로의 배송이 이루어지고 있다는 뜻입니다. 따라서 배송준비중으로 배송상태가 넘어간 경우 취소및 반품이 불가하므로 이점 양해 부탁드립니다.

          5. 타 해외구매대행 사이트에서 주문하신 물건과 주문날짜가 겹치지않도록 주의해 주십시오. 통관날짜가 같을 경우 합산관세가 부가되게 됩니다.
          [고객센터]
          전화 : 02-2283-1300
          팩스 : 02-2283-1304
          메일 : ask@wikimobile.co.kr
          [업무시간안내]
          -전화(채팅)상담 10:00~17:00
          -점심시간 12:30~13:40
          -토,일요일,공휴일휴무
          [계좌 예금주:(주)위키모바일]
          * 국민은행 989801-00-039436
          * 농협중앙회 317-0003-2692-21
          * 우리은행 1005-203-780214
          * 기업은행 02-2283-1300
          1.코딩N메이커[Coding&Maker]
          ARDUINO
          ADAFRUIT
          SPARKFUN
          POLOLU
          Elecfreaks
          DFRobot
          MakeBlock
          BareConductive
          KITRONIK
          PIMORONI
          SALEAE
          ASUS
          ScienceBox
          Chibitronics
          Firmtech
          ZEROPLUS
          RoboRobo
          ETboard
          카미봇
          코코아팹
          팀보로봇
          쇼핑몰이용안내
          notice qna
          goods_review 입금자찾기
          faq 쇼핑몰활용 Tips
          동영상라이브러리 골드버그장치
          자료실
          전자계약사이트
          학교장터
          나라장터
          연구원카드결제
          회사명 : (주)위키모바일(로봇사이언스몰) | 사업자등록번호 : 215-87-14086 [사업자정보확인] | 주소 : 서울특별시 송파구 법원로 114 엠스테이트 B동704호
          통신판매업 신고 : 제2008-서울송파-0867호 | 연락처 : 02-2283-1300 | FAX : 02-2283-1304 | 개인정보보호 책임자 : 김 경식 | 대표자 : 김경식
          호스팅사업자 : 가비아 퍼스트몰 | contact : ask@wikimobile.co.kr for more information
          *로봇사이언스몰의 콘텐츠 저작권은 (주)위키모바일에 있으며 무단·전재·복사 배포를 금합니다.
          회원님의 소중한 개인정보 보호를 위해 비밀번호를 주기적으로 변경하시는 것이 좋습니다.
          현재 비밀번호
          신규 비밀번호
          신규 비밀번호 확인
          비밀번호는 영문 대문자, 영문 소문자, 숫자, 특수문자 중 2가지 이상을 조합한 8~20자