여러분의 지식탐구 동행자 로봇사이언스몰입니다.
Login Join Cart Order MyPage CS Center
School PayAfter 전문가에게 상품추천받기 결제오류 문의전화번호안내 회원전용 개인결제창 비회원 개인결제창
1vs1Question UserManual AttachedIcon Online Class Biz Partner Join Partner
A/S접수하기 기술문의 견적서 요청하기 할인&이벤트상품 방과후수업 코딩강사매칭

QUICK MENU

최근본상품 0

    prev
    /
    next

    추천상품 0

      prev
      /
      next

      장바구니 0

        prev
        /
        next

        위시리스트 0

          prev
          /
          next

          TOP BOTTOM
          네이버 톡톡  톡톡
           
          • 이 시스템 내 프로그래머는 A-Star 328PB Micro, Orangutan 로봇 컨트롤러 및 3pi 로봇과 같은 AVR 마이크로 컨트롤러 및 AVR 기반 컨트롤러 보드를 프로그래밍하는 데 사용할 수 있습니다. 프로그래머는 가상 직렬 포트에서 STK500을 에뮬레이트하여 표준 AVR 프로그래밍 소프트웨어와 호환되며 3.3V 또는 5V에서 실행되는 장치를 지원합니다.
          • [로봇사이언스몰][Pololu][폴로루] Pololu USB AVR Programmer v2.1 #3172
            상품번호 : 16153

            아이콘 설명보기
          • 상품코드 : RS-016153
            * 해외상품 국내보유 재고 : 5 개
            * 재고가 0 또는 수량 부족 시 해외상품배송안내 클릭
            * 국내상품/해외상품 식별방법 보러가기
            판매가
            39,800(부가세포함)
            무이자할부
            5만원 이상 무이자 자세히보기

            무이자할부

            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            닫기
            배송
            • 3,500₩ (100,000₩ 이상 무료)
              추가배송비 : 1,000₩~10,000₩ (지역별)
              지역별차등금액적용
              달력
            적립혜택
            398₩
            상품정보

            상품정보제공고시

            품명 및 모델명 상세설명참조
            법에 의한 인증,허가 등을 받았음을 확인할수 있는 경우 그에 대한 사항 상세설명참조
            제조국 또는 원산지 상세설명참조
            제조자,수입품의 경우 수입자를 함께 표기 상세설명참조
            AS책임자와 전화번호 또는 소비자상담 관련 전화번호 상세설명참조
            상품위치 A14-014
            닫기
            고객평가
            0건  ★★★★★ (0/5)
            판매자
            본사
          • 수량
            • 총 상품금액
            • 39,800
          • 위시리스트

          This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our A-Star 328PB Micro, Orangutan robot controllers, and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software, and it supports devices running at either 3.3 V or 5 V. The programmer also features a TTL-level serial port, enabling general-purpose serial communication for debugging or programming microcontrollers with a serial bootloader. An ISP cable and a 1×6 double-sided male header are included with this fully-assembled programmer.

          The Pololu USB AVR Programmer v2 (bottom) connected to an A-Star 32U4 Prime SV for programming.

          The Pololu USB AVR Programmer v2.1 is a compact, low-cost in-system programmer (ISP) for AVR microcontrollers from Atmel (now a part of Microchip). The programmer provides an interface for transferring a compiled AVR program from your computer to the target AVR’s non-volatile memory, allowing it to run the program. It is a good solution for programming AVR-based controllers like our A-Star 328PB Micro and Orangutan robot controllers. It can also be used to update, replace, or remove the bootloader on some Arduino boards including the Uno, Leonardo, and Mega, and also on our Arduino-compatible A-Star controllers. This programmer is designed to work well with both 3.3 V and 5 V devices, and it can even be configured to provide power to the target device in low-power systems.

          The programmer connects to your computer’s USB port via a standard USB A to Micro-B cable (not included) and communicates with your programming software, such as Atmel Studio, AVRDUDE, or the Arduino IDE, through a virtual COM port using the STK500 protocol. The programmer connects to your target device via an included 6-pin ISP programming cable (the older, 10-pin ISP connections are not directly supported, but it’s easy to create or purchase a 6-pin-to-10-pin ISP adapter). The programmer also acts as a USB-to-TTL serial adapter, providing a TTL-level serial port that can be used to communicate with other serial devices from your computer. It ships fully assembled with connectors soldered in as shown.

          The Pololu USB AVR Programmer v2.1 is a drop-in replacement for the older Pololu USB AVR Programmer v2 with several hardware improvements that are described in the “Comparison to previous AVR programmers” section below.

          This product requires a USB A to Micro-B cable to connect to a computer.

          Features and specifications



          • Connects to a computer through USB via a USB A to Micro-B cable (not included)
          • Emulates an STK500 programmer through virtual COM port interface
          • Works with standard AVR programming software, including Atmel Studio, AVRDUDE, and the Arduino IDE
          • Configuration software available for Windows, Mac OS X, and Linux
          • Supports both 3.3 V and 5 V devices; can automatically switch operating voltage based on detected target VCC
          • Can optionally power the target at 3.3 V or 5 V in low-power systems
          • USB-to-TTL serial adapter functionality for general-purpose serial communication
          • Provides a 100 kHz clock output, which can be useful for reviving misconfigured AVRs
          • All I/O pins are protected with 470 Ω resistors
          • 6-pin ISP cable and a 1×6 double-sided male header included
          • Comprehensive user’s guide

          Supported AVR microcontrollers

          The programmer should work with all AVRs that can be programmed with the AVR ISP (in-system programming) interface, which is also known as in-circuit serial programming (ICSP), serial programming, or serial downloading, but it has not been tested with all devices. We expect it to work with most AVRs in the megaAVR (ATmega) family, and it works with some members of the tinyAVR (ATtiny) family, but it does not support the Tiny Programming Interface (TPI), and it does not work with the XMEGA family or with 32-bit AVRs. The programmer features upgradable firmware, allowing updates for future devices.

          The programmer is designed for use with AVR microcontrollers running at either 3.3 V or 5 V. By default, the programmer expects the target to be self-powered, but it can be configured to deliver power to the target device in low-power systems.

          Supported operating systems

          We support using the Pololu USB AVR Programmer v2.1 and its configuration software on desktop versions of Windows (7, 8, and 10), Linux, and Mac OS X 10.11 or later. Older versions of Windows are not supported.

          Bonus feature: TTL-level serial port

          The Pololu USB AVR Programmer v2 (top) connected to an Adafruit Pro Trinket for programming.

          his programmer doubles as a USB-to-serial adapter. The programmer installs as two virtual COM ports: one for communicating with programming software and one for general-purpose serial communications. This means that you can seamlessly switch between programming an AVR and debugging it through the TTL serial port without having to open and close your terminal program. In addition to the serial transmit (TX) and receive (RX) lines, the programmer lets you use A and B as serial handshaking lines that can be configured using our software.

          The six pins on the serial header (GND, A, VCC, TX, RX, and B) are arranged to be similar to the pinout of commonly-available FTDI USB-to-serial cables and breakout boards. In the default configuration, pin B is used as the DTR output (and pin A is an unused input), which allows you to plug the programmer directly into a variety of Arduino-compatible boards (including our A-Star 328PB Micro) and use it to upload programs to the board via a serial bootloader.


          Included accessories

          The Pololu USB AVR Programmer v2.1 ships fully assembled with ISP and serial connectors soldered in, and it includes the accessories shown in the picture below. The 6-pin ISP cable can be used to program AVRs. The 1×6 double-sided male header can be plugged into the serial header to effectively reverse its gender (making it possible to connect that header to a breadboard or female jumper wires).


          Pololu USB AVR Programmer v2 or v2.1 with included hardware.

          Comparison to previous AVR programmers


          From left to right: the original Orangutan USB Programmer, the Pololu USB AVR Programmer, and the Pololu USB AVR Programmer v2 (which looks almost the same as v2.1).

          The Pololu USB AVR Programmer v2.1 (product #1372) is a drop-in replacement for our older Pololu USB AVR Programmer v2 (product #3170) with three hardware improvements:

          • The optional VCC output feature of the v2 programmer (which allows you to power your AVR target from the programmer) was not designed to power loads with more than a few microfarads of capacitance. The v2.1 programmer has better VCC output circuity, so it can power higher-capacitance boards that would have caused the v2 programmer to continually experience brown-out resets. While there is still a limit to how much capacitance it can handle, we expect the v2.1 VCC output feature to work with most small AVR target boards that have less than about 33 µF of capacitance on VCC, and we have tested it with the A-Star 328PB Micro.
          • Plugging a v2 programmer into a 3pi robot could cause one of the motors to briefly run at full speed because the programmer’s circuitry for measuring VCC could inadvertently pull up one of the 3pi’s programming pins (which doubles as a motor driver input) before the GND connection was established. The v2.1 programmer has improved circuitry for measuring VCC which limits the duty cycle of this effect to about 0.2%, so the motor won’t move (but it might make a 25 Hz clicking sound).
          • The v2 programmer would typically brown-out if a 5 V signal was applied to its RST pin while it was operating at 3.3 V. The v2.1 programmer does not have this problem.

          Compared to the original Pololu USB AVR Programmer (product #1300), the Pololu USB AVR Programmer v2.1 features a number of improvements:

          • Support for devices operating at 3.3 V (in addition to 5 V)
          • VCC pin can be configured to provide 3.3 V or 5 V power to target in low-power systems
          • Protection resistors on all I/O lines
          • More accurate emulation of the ISP frequencies provided by the STK500; you can use the user interfaces of Atmel Studio and AVRDUDE to set your ISP frequency more easily
          • Usability enhancements for serial interface, such as a more standard pin arrangement (similar to FTDI) and a pre-populated female header

          This v2.1 programmer does not include a USB cable, and it does not have the SLO-scope bonus feature. In addition to these changes, many other details are different between the v2.1 programmer and the original; please be sure to refer to the user’s guide for the v2.x programmers to familiarize yourself with this programmer.

          Specs

          Identifying markings

          PCB dev codes:pgm04b
          Other PCB markings:0J11125
          Resrources

          Documentation and other information

          File downloads

          Recommended links





          1. 소비자상담센터 : 02-2283-1300 

          2. 상품준비 및 배송기간안내
           
              상품 출고(배송) 준비기간 
                  a. 국내상품 : 
                       1) 해당상품 : 아이콘이 부착된 상품 
                       2) 입금 확인 후 최소 0일~최대 3일(단, 품절상품 제외) 

                  b. 해외상품 :

                       1) 해당상품: 아이콘이 부착된 상품 

                       2) 구매금액 700,000원 이상 : 입금확인 후 최소 5일 ~ 최대 2주 

                       3) 구매금액 700,000원 이하 : 입금확인 후 최소 1주 ~ 최대 8주 

                       4) 단, 해외계약업체에 품절되지 않은 상품에 한함 

             ② 구매상품 종류가 많을 경우 예상 준비기간 보다 더 소요 될 수 있습니다. 

             ③ 주문하신 상품은 출고완료 메일 또는 문자 수신 후 익일~최대7일(도서,산간지역) 

                이내에 수령하실 수 있습니다. 

             ④ 제주(\3,500원)/도서지역(\5,000원)은 배송비가 추가됩니다. 

                제주,도서, 산간지역은 타 지역보다 배송기간이 길어질 수 있습니다. 

             ⑤  아이콘이 부착된 상품이라도 국내재고가 있을 수 있습니다. 

             ⑥ 해외 현지 사정으로 인해 공지한 배송기간보다 더 길어 질 수 있습니다. 

             ⑦ 해외상품은 반품/교환/취소가 어려울 수 있으니 신중히 주문하시기 바랍니다.

           

          3. 소비자의 단순변심/착오구매에 의한 청약철회제한안내 


              전자상거래 등에서의 소비자보호에 관한 법률 제17조 제2항 및 동 시행령 

                제21조에 의한 청약철회 제한 사유에 해당하는 경우 및 기타 객관적으로 

                이에 준하는 것으로 인정되는 경우에 한합니다. 

             ② 소비자의 단순변심, 착오구매에 의한 교환/반품 시에 발생하는 배송비는 

                소비자가 부담합니다. 

             ③ 판매자의 실수,제품하자 등의 사유로 인한 배송비는 판매자가 부담합니다.

           

          4. 상품의 교환/반품/보증조건 및 품질보증기준안내

           

              상품이 공급된 날(배송완료일)로부터 7일 이내에 교환/반품을 신청 할 수 있습니다. 

                그러나 아래의 사유에 해당 하는 경우에는 교환/반품 신청이 받아들여지지 않을 수도 있습니다. 

                  a. 소비자의 책임으로 인해 상품이 훼손/멸실 된 경우(확인을 위한 포장훼손제외) 

                  b. 소비자의 사용에 의해 상품의 가치가 현저하게 감소한 경우 

                  c. 시간의 경과로 인해 상품의 재판매가 불가하게 된 경우 

                  d. 판매방식의 특성으로 판매자에게 회복할 수 없는 피해가 발생한 경우 (주문제작 상품, 청약철회상품 등) 

             ② 교환/반품/보증조건 및 품질보증기준은 『소비자기본법』에 따른 소비자분쟁해결기준에 따라 피해를 보상합니다.

           

          5. 소비자피해보상 처리, 재화 등에 대한 불만 및 분쟁처리 안내

           

             ① 본 상품은 소비자 분쟁해결기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.


          관련상품

            • 아두이노 우노 R3 초보자 키트 스텝 1
            • 아두이노 실습을 위한 필수 부품이 포함된 키트, 특히 아두이노 코딩 배우기 교재를 따로 구매 하실 수 있는 제품입니다.
            • 판매가 ₩ 24,200
            • 페이지뷰 8,329
              • 조건부 무료배송
            • 라즈베리파이 고급 키트
            • 다양한 입출력-센서-디스플레이-통신-인터페이스 모듈 및 기타 액세서리로 구성된 울티메이트 라즈베리파이 키트
            • 판매가 ₩ 99,000
            • 페이지뷰 1,465
              • 조건부 무료배송
            • 아두이노 메가 2560 고급 키트
            • 아두이노 우노 R3보다 많은 입출력포트 확보가 가능하여 다양한 확장모듈 연동이 가능한 키트로 번거로운 케이블 연결을 최소화한 전문엔지니어를 위한 메가2560기반 아두이노 고급 키트
            • 판매가 ₩ 132,000
            • 페이지뷰 9,999+
              • 조건부 무료배송

          판매자 관련상품

          판매자 정보

          판매자 정보
          판매자 본사  셀러등급
          상호명 (주)위키모바일(로봇사이언스몰) 대표자 김경식
          사업자등록번호 215-87-14086 통신판매신고번호 제2008-서울송파-0867호
          연락처 02-2283-1300 사업장 소재지 서울특별시 송파구 문정동 643-1 엠스테이트 B동704호
          1. 주문하신 물품의 총 결제금액이 15만원 이상 (환율의 변동에 따라 다를 수 있음) 이면 과부가세가 발생합니다. 관부가세는 고객님께서 부담하시는 금액으로 문자를 통해 입금내역이 발송되며 해당 관세사로 입금하시면 통관처리됩니다.

          2. 해외구매 특성상 주문에서 배송까지는 평균 10~15일이 소요됩니다. 간혹 현지 제품 수급에 따라 부득이하게 시일이 더 소요 될 수 있으니 구매시 좀 더 여유있게 주문하시길 권합니다.

          3. 해외 내수품인 관계로 A/S에 대해서는 별도의 책임을 지지 않습니다.

          4. 해외배송 특성상 주문접수후 배송상태가 배송준비중으로 넘어간 경우 해외에서 국내로의 배송이 이루어지고 있다는 뜻입니다. 따라서 배송준비중으로 배송상태가 넘어간 경우 취소및 반품이 불가하므로 이점 양해 부탁드립니다.

          5. 타 해외구매대행 사이트에서 주문하신 물건과 주문날짜가 겹치지않도록 주의해 주십시오. 통관날짜가 같을 경우 합산관세가 부가되게 됩니다.
          [고객센터]
          전화 : 02-2283-1300
          팩스 : 02-2283-1304
          메일 : ask@wikimobile.co.kr
          [업무시간안내]
          -전화(채팅)상담 10:00~17:00
          -점심시간 12:30~13:40
          -토,일요일,공휴일휴무
          [계좌 예금주:(주)위키모바일]
          * 국민은행 989801-00-039436
          * 농협중앙회 317-0003-2692-21
          * 우리은행 1005-203-780214
          * 기업은행 02-2283-1300
          1.코딩N메이커[Coding&Maker]
          ARDUINO
          ADAFRUIT
          SPARKFUN
          POLOLU
          Elecfreaks
          DFRobot
          MakeBlock
          BareConductive
          KITRONIK
          PIMORONI
          SALEAE
          ASUS
          ScienceBox
          Chibitronics
          Firmtech
          ZEROPLUS
          RoboRobo
          ETboard
          카미봇
          코코아팹
          팀보로봇
          쇼핑몰이용안내
          notice qna
          goods_review 입금자찾기
          faq 쇼핑몰활용 Tips
          동영상라이브러리 골드버그장치
          자료실
          전자계약사이트
          학교장터
          나라장터
          연구원카드결제
          회사명 : (주)위키모바일(로봇사이언스몰) | 사업자등록번호 : 215-87-14086 [사업자정보확인] | 주소 : 서울특별시 송파구 법원로 114 엠스테이트 B동704호
          통신판매업 신고 : 제2008-서울송파-0867호 | 연락처 : 02-2283-1300 | FAX : 02-2283-1304 | 개인정보보호 책임자 : 김 경식 | 대표자 : 김경식
          호스팅사업자 : 가비아 퍼스트몰 | contact : ask@wikimobile.co.kr for more information
          *로봇사이언스몰의 콘텐츠 저작권은 (주)위키모바일에 있으며 무단·전재·복사 배포를 금합니다.
          회원님의 소중한 개인정보 보호를 위해 비밀번호를 주기적으로 변경하시는 것이 좋습니다.
          현재 비밀번호
          신규 비밀번호
          신규 비밀번호 확인
          비밀번호는 영문 대문자, 영문 소문자, 숫자, 특수문자 중 2가지 이상을 조합한 8~20자